LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS DH40 Shipbuilding steel plate

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 DH40 steel plate is a kind of steel for shipbuilding and platform.Shipbuilding steel plate DH40 is the high tensile strength steel. As a professional shipbuilding steel plate exporter, Bebon international can supply steel plate DH40. ASTM A 131 DH40 shipbuilding steel plates can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons.

DH40 Shipbuilding Steel Specification:
Thickness: 4 mm to 260mm, 
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.

DH40 steel plate Chemical Composition %

Grade	C max	Si max	Mn	P max	S max	Als min	Ti max	Cu max	Cr max	Ni max	Mo max	Nb	V
DH40	0.18	0.50	0.90-1.60	0.035	0.035	0.015	0.02	0.35	0.20	0.40	0.08	0.02-0.05	0.05-0.10

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.40% (thickness ≤ 50mm). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

DH40 steel plate Mechanical Property

Grade	Rm (MPa)	Re(MPa) min	A% min	Akv/J min
DH40	510-660	390	20	E.T °C	Thickness (mm)
				0	≤ 50		>50-70		>70-100
					L	C	L	C	L	C
					41	27	-

Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

DH40 steel plate Condition Of Delivery

Grade	Fine grains elements	category	The thickness of steel
			≤ 12	>12.5-20	>20-25	>25-35	>35-50	>50-100
DH40	any	Plate/ sheet	N(50),CR(50),TM(50)					-
		Profile steel

Note: 1. DH40 Shipbuilding steel delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

DH40 steel plate Available Specification

variety		Thickness (mm)	Width (mm)	Longth/ inner diameter (mm)
Shipbuilidng plate	cutting edges	6~200	1500~3000	3000~15000
	non- cutting edges		1300~3000
Shipbuilidng coil	cutting edges	1.2~19	1500~2000	760+20~760-70
	non-cutting edges		1510~2010

DH40 steel plate theoretical weight

Thickness (mm)	theoretical weight		Thickness (mm)	theoretical weight
	Kg/ft2	Kg/m2		Kg/ ft2	Kg/m2
6	4.376	47.10	25	18.962	196.25
7	5.105	54.95	26	20.420	204.10
8	5.834	62.80	28	21.879	219.80
10	7.293	78.50	30	23.337	235.50
11	8.751	86.35	32	25.525	251.20
12	10.21	94.20	34	26.254	266.90
14	10.939	109.90	35	27.713	274.75
16	11.669	125.60	40	29.172	314.00
18	13.127	141.30	45	32.818	353.25
20	14.586	157.00	48	35.006	376.80
22	16.044	172.70	50	36.464	392.50
24	18.232	188.40

DH40 steel plate dimensional deviation

nominal thickness（mm）	The thickness deviation with following width (mm)
	≤1200	>1200~1500	>1500~1800	>1800
>6.0~8.0	±0.29	±0.30	±0.31	±0.35
>8.0~10.0	±0.32	±0.33	±0.34	±0.35
>10.0~12.0	±0.35	±0.36	±0.37	±0.43

nominal thickness（mm）	minus deviation (mm)	The thickness deviation with following width (mm)
		> 1000 ~1200	> 1200 ~1500	> 1500 ~1700	> 1700 ~1800	> 1800 ~2000	> 2000 ~2300	> 2300 ~2500	> 2500 ~2600	2600 ~2800	> 2800 ~3000
>12~25	-0.8	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.8	+1.0	+1.1	+1.2
>25~30	-0.9	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.1	+1.2
>30~34	-1.0	+0.2	+0.3	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.2	+1.3
>34~40	-1.1	+0.3	+0.4	+0.5	+0.6	+0.7	+0.9	+1.0	+1.1	+1.3	+1.4
>40~45	-1.2	+0.4	+0.5	+0.6	+0.7	+0.8	+1.0	+1.1	+1.2	+1.4	+1.5